Alida MAZZOLI

Pubblicazioni

Alida MAZZOLI

 

95 pubblicazioni classificate nel seguente modo:

Nr. doc. Classificazioni
42 1 Contributo su Rivista
33 4 Contributo in Atti di Convegno (Proceeding)
19 2 Contributo in Volume
1 6 Brevetti
Anno
Risorse
2024
A Numerical Simulation Approach to Study the Effects of MADs Embedded with Elastic Bands in OSA Treatment
Design Tools and Methods in Industrial Engineering III
Autore/i: Caragiuli, Manila; Mandolini, Marco; Candelari, Mara; Brunzini, Agnese; Mazzoli, Alida; Bruno, Giovanni; De Stefani, Alberto; Zalunardo, Francesca; Gracco, Antonio
Classificazione: 2 Contributo in Volume
Abstract: Obstructive Sleep Apnea (OSA) is a nocturnal respiratory disorder characterised by recurrent episodes of partial or total obstruction of the upper airways due to the collapse of the pharyngeal tissue. Mandibular Advancement Devices (MADs) restore regular breathing during sleep by advancing the lower jaw in a controlled way to increase the upper airway volume. However, the relaxation of muscle tone that naturally occurs during sleep induces a vertical mouth opening that impairs the efficacy of the treatment. Thus, elastic bands are recommended to keep the mouth firmly closed. Despite successfully treating OSA, inadequate evidence exists about the effects ofMADs supported by elastic bands on teeth and Periodontal Ligaments (PDLs). This study aims to develop a numerical simulation approach through the finite element method to evaluate the behaviour and the effects (displacement and stress fields) of MADs embedded with intermaxillary elastics on PDLs and teeth of patients suffering from OSA. Findings confirm the efficacy of elastics in con- trolling the mouth opening and reveal a stress increase at the anchorage regions. Thus, their use should be advised to patients who do not suffer from periodontal problems
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/329558 Collegamento a IRIS

2024
Mixed Reality and Maxillofacial Surgery: An Interactive Twofold-Modality Application
Design Tools and Methods in Industrial Engineering III
Autore/i: Brunzini, Agnese; Danieli, Andrea; Caragiuli, Manila; Mazzoli, Alida; Pagnoni, Mario; Mandolini, Marco
Classificazione: 2 Contributo in Volume
Abstract: Using custom-made physical cutting guides in maxillofacial surgery presents several drawbacks, mainly related to design, time, and costs. Even if the literature provides several Augmented Reality (AR) solutions, they mostly display cutting planes and static assistance for repositioning. This work proposes a Mixed Reality (MR) application, deployed on Microsoft HoloLens2, to guide the surgeon in maxillofacial osteotomies and repositioning through intuitive and interactive digital content. A holographic panel allows selecting between the osteotomy and repositioning modes. With the first one, the cutting lines and the drilling points for the fixation plates are overlaid on the patient’s skull. With the second one, three different kinds of feedback simultaneously guide the surgeon toward the correct final bone placement, step-by-step, according to the real-time fragment displacement. The MR app was tested by seven inexperienced subjects using a 3D-printed skull. Satisfactory results were obtained for maxillary osteotomy (i.e., less than 1.5 mm deviations) and relocation (i.e., the accuracy is about 0.7 mm and 0.6°).
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/329561 Collegamento a IRIS

2023
A Medical Device for Correctly Positioning Custom-Made Implants for Fractured Orbital Cavities
Advances on Mechanics, Design Engineering and Manufacturing IV
Autore/i: Caragiuli, Manila; Mandolini, Marco; Brunzini, Agnese; Mazzoli, Alida; Pagnoni, Mario
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/306387 Collegamento a IRIS

2023
New Materials and Technologies for Durability and Conservation of Building Heritage
MATERIALS
Autore/i: Coppola, Luigi; Bellezze, Tiziano; Belli, Alberto; Bianco, Alessandra; Blasi, Elisa; Cappello, Miriam; Caputo, Domenico; Chougan, Mehdi; Coffetti, Denny; Coppola, Bartolomeo; Corinaldesi, Valeria; D’Amore, Alberto; Daniele, Valeria; Di Maio, Luciano; Di Palma, Luca; Donnini, Jacopo; Ferrara, Giuseppe; Filippi, Sara; Gastaldi, Matteo; Generosi, Nicola; Giosuè, Chiara; Incarnato, Loredana; Lamastra, Francesca; Liguori, Barbara; Macera, Ludovico; Maqbool, Qaisar; Cristina Mascolo, Maria; Mavilia, Letterio; Mazzoli, Alida; Medici, Franco; Mobili, Alessandra; Montesperelli, Giampiero; Pia, Giorgio; Redaelli, Elena; Ruello, Maria Letizia; Scarfato, Paola; Taglieri, Giuliana; Tittarelli, Francesca; Tulliani, Jean-Marc; Valenza, Antonino
Classificazione: 1 Contributo su Rivista
Abstract: The increase in concrete structures’ durability is a milestone to improve the sustainability of buildings and infrastructures. In order to ensure a prolonged service life, it is necessary to detect the deterioration of materials by means of monitoring systems aimed at evaluating not only the penetration of aggressive substances into concrete but also the corrosion of carbon-steel reinforcement. Therefore, proper data collection makes it possible to plan suitable restoration works which can be carried out with traditional or innovative techniques and materials. This work focuses on building heritage and it highlights the most recent findings for the conservation and restoration of reinforced concrete structures and masonry buildings.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/311867 Collegamento a IRIS

2023
An innovative mixed reality approach for maxillofacial osteotomies and repositioning
VIRTUAL REALITY
Autore/i: Brunzini, Agnese; Mazzoli, Alida; Pagnoni, Mario; Mandolini, Marco
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/328871 Collegamento a IRIS

2022
Comparison of Three 3D Segmentation Software Tools for Hip Surgical Planning
SENSORS
Autore/i: Mandolini, Marco; Brunzini, Agnese; Facco, Giulia; Mazzoli, Alida; Forcellese, Archimede; Gigante, Antonio
Classificazione: 1 Contributo su Rivista
Abstract: In hip arthroplasty, preoperative planning is fundamental to reaching a successful surgery. Nowadays, several software tools for computed tomography (CT) image processing are available. However, research studies comparing segmentation tools for hip surgery planning for patients affected by osteoarthritic diseases or osteoporotic fractures are still lacking. The present work compares three different software from the geometric, dimensional, and usability perspectives to identify the best three-dimensional (3D) modelling tool for the reconstruction of pathological femoral heads. Syngo.via Frontier (by Siemens Healthcare) is a medical image reading and post-processing software that allows low-skilled operators to produce prototypes. Materialise (by Mimics) is a commercial medical modelling software. 3D Slicer (by slicer.org) is an open-source development platform used in medical and biomedical fields. The 3D models reconstructed starting from the in vivo CT images of the pathological femoral head are compared with the geometries obtained from the laser scan of the in vitro bony specimens. The results show that Mimics and 3D Slicer are better for dimensional and geometric accuracy in the 3D reconstruction, while syngo.via Frontier is the easiest to use in the hospital setting.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/305399 Collegamento a IRIS

2022
HoloLens 2 for Maxillofacial Surgery: A Preliminary Study
Lecture Notes in Mechanical Engineering
Autore/i: Brunzini, A.; Mandolini, M.; Caragiuli, M.; Germani, M.; Mazzoli, A.; Pagnoni, M.
Editore: Springer Science and Business Media Deutschland GmbH
Classificazione: 2 Contributo in Volume
Abstract: Since custom-made 3D printed surgical guides for maxillofacial surgery are usually expensive, Augmented Reality (AR) can be efficiently employed to overcome the high costs. The proposed work aims to develop and test an AR application for different maxillofacial surgeries. The application consists in overlaying the cutting lines on the patient’s mandible to guide the clinician during the procedure. It has been realized in Unity and preliminary tested with HoloLens 2 and a 3D printed mandible. Seven participants performed two consecutive trials. The mandible with the obtained surgical lines has been scanned after each test to digitally reconstruct the traced lines and compare them with the surgical lines previously designed. The results allowed the preliminary analysis of the developed AR system’s accuracy and precision. Mean distances from the designed surgical guides showed good accuracy for the genioplasty (deviation error around 1.03 mm) and orthognathic surgery (deviation error around 1.27 mm), suggesting the applicability of HoloLens 2 for these kinds of surgery. On the contrary, the application was not suitable for the mandibular angle osteotomy (deviation error over 2.50 mm).
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/294350 Collegamento a IRIS

2022
An innovative orbital implant positioner for the proper restoration of eye-socket defects
BIO-DESIGN AND MANUFACTURING
Autore/i: Mandolini, Marco; Brunzini, Agnese; Caragiuli, Manila; Mazzoli, Alida; Pagnoni, Mario
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/307861 Collegamento a IRIS

2022
Preliminary Considerations on the Design of Multi-layered Bone Scaffold for Laser-Based Printing
Proceedings of 2021 International Conference on Medical Imaging and Computer-Aided Diagnosis (MICAD 2021). MICAD 2021. Lecture Notes in Electrical Engineering.
Autore/i: Mazzoli, Alida; Mandolini, Marco; Brunzini, Agnese; Caragiuli, Manila; Germani, Michele
Editore: Su, R., Zhang, YD., Liu, H. (eds)
Luogo di pubblicazione: Singapore
Classificazione: 2 Contributo in Volume
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/299023 Collegamento a IRIS

2022
Evaluation of Mandibular Advancement Devices in Patients Suffering from Obstructive Sleep Apnea and Periodontitis
Lecture Notes in Mechanical Engineering
Autore/i: Mandolini, M.; Caragiuli, M.; Bruno, G.; De Stefani, A.; Gracco, A.; Mazzoli, A.; Brunzini, A.
Editore: Springer Science and Business Media Deutschland GmbH
Classificazione: 2 Contributo in Volume
Abstract: The Obstructive Sleep Apnea Syndrome (OSA) concerns episodes of complete or partial obstruction of the upper airway. Mandibular Advancement Device (MAD) is one of the most used systems for treating this syndrome. Clinicians frequently observe a combination of OSA and periodontitis. There is no research aiming to evaluate how periodontitis staging affects the overall mandibular and maxillary dental arches in the literature. Furthermore, no one has studied the combination between OSA and periodontitis and the effects of MADs on the patients in this condition. This paper aims to develop a numerical simulation approach based on FEM and evaluate the consequences (displacement and stress fields) of the periodontitis staging on PDL and teeth of patients suffering from OSA and treated with MADs. Simulations have been performed for evaluating Stage I of periodontitis. Results highlight a correlation between bone resorption and teeth displacement and periodontal ligaments stress (the higher the bone resorption, the higher the stress and displacement).
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/294348 Collegamento a IRIS

2021
Mechanical, durability, depolluting and electrical properties of multifunctional mortars prepared with commercial or waste carbon-based fillers
CONSTRUCTION AND BUILDING MATERIALS
Autore/i: Mobili, Alessandra; Belli, Alberto; Giosue', Chiara; Pierpaoli, Mattia; Bastianelli, Luca; Mazzoli, Alida; Ruello, Maria Letizia; Bellezze, Tiziano; Tittarelli, Francesca
Classificazione: 1 Contributo su Rivista
Abstract: Carbon-based fillers from industrial wastes and commercial ones were compared to improve the properties of lime-based mixes. As commercial fillers, graphene nanoplatelets and activated carbon were used, whereas as industrial wastes a char obtained by the gasification of biomasses and a used foundry sand were chosen. Carbon-based wastes were found to be a good cost-effective alternative to commercial carbon based fillers to increase the compressive strength (of about 25%) and to reduce water capillary absorption (of about 50%) thanks to the paste refinement; to enhance depollution capacity (of about 25%) and increase both electrical conductivity (up to 65%) and electromagnetic shielding effectiveness (of about 6%) of the hardened compounds thanks to the carbon content.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/288423 Collegamento a IRIS

2021
Evaluation of the Effects Caused by Mandibular Advancement Devices Using a Numerical Simulation Model
Advances on Mechanics, Design Engineering and Manufacturing III
Autore/i: Mandolini, Marco; Caragiuli, Manila; Landi, Daniele; Gracco, Antonio; Bruno, Giovanni; De Stefani, Alberto; Mazzoli, Alida
Classificazione: 2 Contributo in Volume
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/294343 Collegamento a IRIS

2020
Comparison of the Effects Caused by Three Different Mandibular Advancement Devices on the Periodontal Ligaments and Teeth for the Treatment of Osa: A Finite Element Model Study
APPLIED SCIENCES
Autore/i: Bruno, Giovanni; de Stefani, Alberto; Caragiuli, Manila; Zalunardo, Francesca; Mazzoli, Alida; Landi, Daniele; Mandolini, Marco; Gracco, Antonio
Classificazione: 1 Contributo su Rivista
Abstract: AIM: The purpose of this study is to compare the stress effects developed on the periodontal ligaments and teeth by three different types of mandibular advancement devices (MADs) using a finite element method (FEM) analysis. Introduction: Obstructive sleep apnea (OSA) is a disease with a high prevalence and, in recent years, the use of MADs as an alternative or support treatment to the continuous positive airway pressure (CPAP) has spread. Their use finds relative contraindications in the case of partial edentulism and severe periodontal disease. Given the widespread of periodontal problems, it is essential to know the effects that these devices cause on the periodontal ligament of the teeth. Materials and methods: Starting from the computed tomography (CT) scan of a patient’s skull, 3D reconstructions of the maxilla and mandible were implemented. Three different MADs were prepared for the patient, then 3D scanned, and lastly, coupled with the 3D models of the jaws. The devices have two different mechanics: One has a front reverse connecting rod (Orthoapnea™), and two have lateral propulsion (Somnodent™ and Herbst™). A FEM analysis was performed to calculate the stress applied on periodontal ligaments, on every single tooth and the displacement vectors that are generated by applying an advancement force on the mandible. Results: Herbst™ and Somnodent™ devices present very similar stress values, mainly concentrated on lateral teeth, but in general, the forces are very mild and distributed. The maximum stresses values are 3.27 kPa on periodontal ligaments and 287 kPa on teeth for Somnodent™ and 3.56 kPa on periodontal ligaments and 302 kPa on teeth for Herbst™. Orthoapnea™ has, instead, higher and concentrated stress values, especially in the anterior maxillary and mandibular area with 4.26 kPa and 600 kPa as maximum stress values, respectively, on periodontal ligaments and teeth. Conclusions: From the results, it is concluded that devices with a bilateral mechanism generate less and more distributed stress than an anterior connecting rod mechanism. Therefore, they may be advisable to patients with compromised periodontal conditions in the anterior area.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/284087 Collegamento a IRIS

2020
Methodology for evaluating effects of mandibular advancement devices in treating OSAS
INTERNATIONAL JOURNAL ON INTERACTIVE DESIGN AND MANUFACTURING
Autore/i: Mandolini, Marco; Caragiuli, Manila; Landi, Daniele; Gracco, Antonio; Bruno, Giovanni; De Stefani, Alberto; Mazzoli, Alida
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/284088 Collegamento a IRIS

2020
A Procedure for Designing Custom-Made Implants for Forehead Augmentation in People Suffering from Apert Syndrome
JOURNAL OF MEDICAL SYSTEMS
Autore/i: Mandolini, M.; Caragiuli, M.; Brunzini, A.; Mazzoli, A.; Pagnoni, M.
Classificazione: 1 Contributo su Rivista
Abstract: This paper presents a methodological procedure, based on the anatomical reconstruction and constrained deformation, to design custom-made implants for forehead augmentation in people affected by Apert syndrome, experiencing a frontal bone deficiency. According to the anthropometric theory, a cranial landmarks identification procedure was applied to retrieve, from a repository, a healthy skull, used as reference geometry for implant modelling. Then, using constrained deformation and free-form modelling techniques, it was possible to design a patient-specific implant. At last, the implant was realised using a custom mould, specially designed according to the patient’s needs to provide an accurate fit of the defect site. The design procedure was tested on a patient suffering from Apert syndrome. Three implants were virtually modelled and 3D-printed for pre-surgical evaluation. Their shapes were 3D compared with a reference one (handcrafted by a surgeon) to test the accuracy. Deviations are negligible, and the customised implant fulfilled the surgeon’s requirements.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/284086 Collegamento a IRIS

2019
Design of a custom-made cranial implant in patients suffering from Apert syndrome
Proceedings of the International Conference on Engineering Design, ICED
Autore/i: Mandolini, M.; Brunzini, A.; Brandoni Serrani, E.; Pagnoni, M.; Mazzoli, A.; Germani, M.
Editore: Cambridge University Press
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: This study defines a methodological procedure for the design and manufacturing of a prosthetic implant for the reconstruction of a midsagittal bony-deficiency of the skull due to the Apert congenital disorder. Conventional techniques for craniofacial defects reconstruction rely on the mirrored-image technique. When the cranial lesion extends over the midline or in case of bilateral defects, other approaches based on thin plate spline interpolation or constrained anatomical deformation are applied. The proposed method uses the anthropometric theory of cranial landmarks identification for the retrieval of a template healthy skull, useful as a guide in the successive implant design. Then, anatomical deformation of the region of interest and free-form modelling allow to get the customized shape of the implant. A full bulk and a porous implant have been provided according to the surgeon advises. The models have been 3D printed for a pre-surgical analysis and further treatment plan. They fulfilled the expectancies of the surgeon thus positive results are predictable. This methodology results to be reproducible to any other craniofacial defect spanning over the entire skull.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/276304 Collegamento a IRIS

2019
Sustainability in Construction Materials: From Waste Valorization to Circular Economy
The First Outstanding 50 Years of “Università Politecnica delle Marche”
Autore/i: Ruello, Maria Letizia; Bellezze, Tiziano; Corinaldesi, Valeria; Donnini, Jacopo; Eusebi, Anna Laura; Fatone, Francesco; Fava, Gabriele; Favoni, Orlando; Fratesi, Romeo; Giosue', Chiara; Giuliani, Giampaolo; Marcellini, Mirco; Mazzoli, Alida; Mobili, Alessandra; Roventi, Gabriella; Tittarelli, Francesca
Editore: Springer
Luogo di pubblicazione: Cham
Classificazione: 2 Contributo in Volume
Abstract: Already from the beginning, 50 years ago, the first nucleus of researchers establishing the research group, was convinced that the construction sector was the best option for the valorization of industrial by-products as “secondary raw materials”. In fact, this sector is probably the largest consumer of resources and the largest waste generator, consequently it has huge environmental impact. On the other hand, construction materials affect the performance of buildings with respect to safety, health, environmental performance and energy efficiency. Manufacturing of construction products using alternative raw materials; recycling to manage construction and demolition waste; durability and environmental compatibility of materials: all these were the different and challenging fields of research that the group has faced in a continuous effort of innovation and cooperation at national and international level. The focus of the group was already perfectly in line with what is now called “Circular Economy”, which at present is considered a revolution in the way of human economic development. We are sure the group thus contributed to this revolution even before the term was in current use. We feel ready for the next 50.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/272692 Collegamento a IRIS

2019
Selective laser sintered mould for orbital cavity reconstruction
RAPID PROTOTYPING JOURNAL
Autore/i: Mandolini, Marco; Brunzini, Agnese; Germani, Michele; Manieri, Steve; Mazzoli, Alida; Pagnoni, Mario
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/264446 Collegamento a IRIS

2018
FINITE ELEMENTS ANALYSIS OF THE STRESS DISTRIBUTION ON TEMPOROMANDIBULAR JOINT DUE TO THE USE OF MANDIBULAR ADVANCEMENT
15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization
Autore/i: Brunzini, Agnese; Mandolini, Marco; Manieri, Steve; Germani, Michele; Mazzoli, Alida
Editore: P. R. Fernandes and J. M. Tavares
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/265291 Collegamento a IRIS

2018
Preliminary simulation model toward the study of the effects caused by different mandibular advancement devices in OSAS treatment
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING
Autore/i: Brunzini, Agnese; Gracco, Antonio; Mazzoli, Alida; Mandolini, Marco; Manieri, Steve; Germani, Michele
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/264448 Collegamento a IRIS

2018
Experimental Analysis of the Aging Effects on Shielding Effectiveness of Cementitious Composites
2018 IEEE Symposium on Electromagnetic Compatibility, Signal Integrity and Power Integrity, EMC, SI and PI 2018
Autore/i: Bastianelli, Luca; Primiani, Valter Mariani; Moglie, Franco; Donnini, Jacopo; Mazzoli, Alida; Corinaldesi, Valeria; Gradoni, Gabriele; Micheli, Davide
Editore: Institute of Electrical and Electronics Engineers Inc.
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: The shielding effectiveness of cementitious composites is analyzed by means of the nested reverberation chamber method. This feature is evaluated as function of time in order to estimate the aging effects. Different cementitious mixtures are considered and carbon/metallic fibers are put within the mortar in order to improve the shielding effectiveness considering the frequency band from 0.8 GHz up to 8.4 GHz
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/266049 Collegamento a IRIS

2018
Binders alternative to Portland cement and waste management for sustainable construction – Part 2
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS
Autore/i: Coppola, Luigi; Bellezze, Tiziano; Belli, Alberto; C Bignozzi, Maria; Bolzoni, Fabio; Brenna, Andrea; Cabrini, Marina; Candamano, Sebastiano; Cappai, Marta; Caputo, Domenico; Carsana, Maddalena; Casnedi, Ludovica; Cioffi, Raffaele; Cocco6, Ombretta; Coffetti, Denny; Colangelo8, Francesco; Coppola, Bartolomeo; Corinaldesi, Valeria; Crea, Fortunato; Crotti, Elena; Daniele, Valeria; De Gisi, Sabino; Delogu, Francesco; V Diamanti, Maria; Di Maio, Luciano; Di Mundo, Rosa; Di Palma, Luca; Donnini, Jacopo; Farina, Ilenia; Ferone, Claudio; Frontera, Patrizia; Gastaldi, Matteo; Giosue', Chiara; Incarnato, Loredana; Liguori, Barbara; Lollini, Federica; Lorenzi, Sergio; Manzi, Stefania; Marino, Ottavio; Marroccoli, Milena; C Mascolo, Maria; Mavilia, Letterio; Mazzoli, Alida; Medici, Franco; Meloni, Paola; Merlonetti, Glauco; Mobili, Alessandra; Notarnicola, Michele; Ormellese, Marco; Pastore, Tommaso; Pia Pedeferri, Maria; Petrella, Andrea; Pia6, Giorgio; Redaelli, Elena; Roviello, Giuseppina; Scarfato, Paola; Scoccia, Giancarlo; Taglieri, Giuliana; Telesca, Antonio; Tittarelli, Francesca; Todaro, Francesco; Vilardi, Giorgio; Yang, Fan
Classificazione: 1 Contributo su Rivista
Abstract: The paper represents the “state of the art” on sustainability in construction materials. In Part 1 of the paper, issues related to production, microstructures, chemical nature, engineering properties, and durability of mixtures based on binders alternative to Portland cement were presented. This second part of the paper concerns the use of traditional and innovative Portland-free lime-based mortars in the conservation of cultural heritage, and the recycling and management of wastes to reduce consumption of natural resources in the production of construction materials. The latter is one of the main concerns in terms of sustainability since nowadays more than 75% of wastes are disposed of in landfills.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/259227 Collegamento a IRIS

2018
Binders alternative to Portland cement and waste management for sustainable construction - Part 1
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS
Autore/i: Coppola, Luigi; Bellezze, Tiziano; Belli, Alberto; Chiara Bignozzi, Maria; Bolzoni, Fabio; Brenna, Andrea; Cabrini, Marina; Candamano, Sebastiano; Cappai, Marta; Caputo, Domenico; Carsana, Maddalena; Casnedi, Ludovica; Cioffi, Raffaele; Cocco, Ombretta; Coffetti, Denny; Colangelo, Francesco; Coppola, Bartolomeo; Corinaldesi, Valeria; Crea, Fortunato; Crotti, Elena; Daniele, Valeria; De Gisi, Sabino; Delogu, Francesco; Vittoria Diamanti, Maria; Di Maio, Luciano; Di Mundo, Rosa; Di Palma, Luca; Donnini, Jacopo; Farina, Ilenia; Ferone, Claudio; Frontera, Patrizia; Gastaldi, Matteo; Giosue', Chiara; Incarnato, Loredana; Liguori, Barbara; Lollini, Federica; Lorenzi, Sergio; Manzi, Stefania; Marino, Ottavio; Marroccoli, Milena; Cristina Mascolo, Maria; Mavilia, Letterio; Mazzoli, Alida; Medici, Franco; Meloni, Paola; Merlonetti, Glauco; Mobili, Alessandra; Notarnicola, Michele; Ormellese, Marco; Pastore, Tommaso; Pia Pedeferri, Maria; Petrella, Andrea; Pia, Giorgio; Redaelli, Elena; Roviello, Giuseppina; Scarfato, Paola; Scoccia, Giancarlo; Taglieri, Giuliana; Telesca, Antonio; Tittarelli, Francesca; Todaro, Francesco; Vilardi and Fan Yang, Giorgio
Classificazione: 1 Contributo su Rivista
Abstract: This review presents “a state of the art” report on sustainability in construction materials. The authors propose different solutions to make the concrete industry more environmentally friendly in order to reduce greenhouse gases emissions and consumption of non-renewable resources. Part 1—the present paper—focuses on the use of binders alternative to Portland cement, including sulfoaluminate cements, alkali-activated materials, and geopolymers. Part 2 will be dedicated to traditional Portland-free binders and waste management and recycling in mortar and concrete production.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/259226 Collegamento a IRIS

2018
Effect of graphene oxide and metallic fibers on the electromagnetic shielding effect of engineered cementitious composites
JOURNAL OF BUILDING ENGINEERING
Autore/i: Mazzoli, A.; Corinaldesi, V.; Donnini, J.; Di Perna, C.; Micheli, D.; Vricella, A.; Pastore, R.; Bastianelli, L.; Moglie, F.; Mariani Primiani, V.
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/255936 Collegamento a IRIS

2018
Strength distribution on TMJ using mandibular advancement device for OSAS treatment: A finite element study
DENTAL CADMOS
Autore/i: Crivellin, Giorgia; Bruno, Giovanni; De Stefani, Alberto; Mazzoli, Alida; Mandolini, Marco; Brunzini, Agnese; Gracco, Antonio
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/264447 Collegamento a IRIS

2017
Use of MIMICS® software in three-dimensional cephalometric evaluation of soft tissues of the face
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING: IMAGING & VISUALIZATION
Autore/i: Mazzoli, Alida; Antonio, Gracco; Masi, Angela; Siciliani, Giuseppe
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/229146 Collegamento a IRIS

2017
ELECTROMAGNETIC PROPERTIES OF CARBON NANOTUBE REINFORCED CONCRETE COMPOSITES FOR FREQUENCY SELECTIVE SHIELDING STRUCTURES
CONSTRUCTION AND BUILDING MATERIALS
Autore/i: Micheli, D.; Vricella, A.; Pastore, R.; Delfini, A.; Buneno Morles, R.; Marchetti, M.; Santoni, F.; Bastianelli, Luca; Moglie, Franco; MARIANI PRIMIANI, Valter; Corinaldesi, Valeria; Mazzoli, Alida; Donnini, Jacopo
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/240471 Collegamento a IRIS

2017
Effect of commercial and waste carbonaceous fillers on the mechanical and electrical properties of innovative mortars
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS
Autore/i: Mobili, Alessandra; Belli, Alberto; Giosue', Chiara; Mancini, Roberto; Mazzoli, Alida; Bellezze, Tiziano; Tittarelli, Francesca
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/251377 Collegamento a IRIS

2017
Orbital wall reconstruction by selective laser sintered mould
Proceedings of the 13th IASTED International Conference on Biomedical Engineering, BioMed 2017
Autore/i: Brunzini, Agnese; Mandolini, Marco; Manieri, Steve; Germani, Michele; Mazzoli, Alida; Pagnoni, Mario; Iannetti, Giorgio; Modugno, Alessandra
Editore: Institute of Electrical and Electronics Engineers Inc.
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/248182 Collegamento a IRIS

2017
Use of the MIMICS software in the three-dimensional cephalometric evaluation of the soft tissues of the face
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING: IMAGING & VISUALIZATION
Autore/i: Mazzoli, Alida; Gracco, Antonio; Masi, Angela; Siciliani, Giuseppe
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/250728 Collegamento a IRIS

2016
Plasma treated PCL scaffolds coated using engineered hydroxyapatite nanoparticles
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS
Autore/i: Mazzoli, Alida; Pierantozzi, Daniele; Mariotti, Davide
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/236230 Collegamento a IRIS

2016
Effect of beta and gamma ray sterilization on the properties of polymeric materials for biomedical applications
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS
Autore/i: Tittarelli, Francesca; Conti, Carla; Favoni, Orlando; Mazzoli, Alida; Bellezze, Tiziano
Classificazione: 1 Contributo su Rivista
Abstract: The goal of this study is to evaluate the effect of sterilization by gamma and beta radiation on the properties of four different polymeric specimens for biomedical use: a PVC pipe for connection in dialysis and heart surgery devices; a PVC band for enteral and parenteral nutrition bags, a TRIFLEX pipe (internal PE, middle PE/PVC, external PVC) for connection, a PC rigid pipe for the connection of tubes and bags for infusions. The effect of sterilization was studied by means of tensile mechanical characterization, thermo-gravimetric and morphological analysis and FT-IR spectroscopy. UV-VIS spectroscopy was used to evaluate the yellowing index, determined by radiation exposure. For each specimen, a no-sterilized one was tested for comparison.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/238300 Collegamento a IRIS

2016
COMMERCIAL AND WASTE CARBON BASED NANO/MICRO FILLERS FOR THE DEVELOPMENT OF INNOVATIVE AND MULTIFUNCTIONAL MORTARS
Cost Action 15107, Multi-Functional Nano-Carbon Composite Materials - MULTICOMP, Scientific Kick-Off meeting
Autore/i: Tittarelli, Francesca; Belli, Alberto; Mobili, Alessandra; Roventi, Gabriella; Corinaldesi, Valeria; Mazzoli, Alida; Bellezze, Tiziano; Ruello, Maria Letizia
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/246367 Collegamento a IRIS

2016
COMMERCIAL AND WASTE CARBON BASED NANO/MICRO FILLERS FOR THE DEVELOPMENT OF INNOVATIVE AND MULTIFUNCTIONAL MORTARS
National Young Researchers' Forum on Materials Science and Technology
Autore/i: Belli, Alberto; Mobili, Alessandra; Giosue', Chiara; Toscano, Giuseppe; Mazzoli, Alida; Bellezze, Tiziano; Tittarelli, Francesca
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/246366 Collegamento a IRIS

2016
Effect of graphene oxide addition on the mechanical and thermal properties of cement-based composites
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS
Autore/i: Donnini, Jacopo; DI PERNA, Costanzo; Mazzoli, Alida; Christiansen, S; Corinaldesi, Valeria
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/236227 Collegamento a IRIS

2016
The use of wood by-products waste for producing lightweight and thermal insulating cement-based materials
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS
Autore/i: Corinaldesi, Valeria; Favoni, Orlando; Mazzoli, Alida; Nardinocchi, Alessandro; Siddique, Rafat
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/236226 Collegamento a IRIS

2016
Shielding effectiveness statistical evaluation of random concrete composites
2016 IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace) Proceedings
Autore/i: Bastianelli, Luca; Capra, Sofia; Gradoni, Gabriele; Micheli, Davide; Vricella, Antonio; Corinaldesi, Valeria; Mazzoli, Alida; Moglie, Franco; MARIANI PRIMIANI, Valter
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: The shielding performance of random concrete composite samples are checked under a random excitation. It is achieved by means of a nested reverberation chamber system. Metallic fibers are randomly diffused in the concrete in order to improve shielding effectiveness from less than 10 dB up to an averaged value of 35 dB within a frequency range that includes communication system operating bands.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/236362 Collegamento a IRIS

2016
Electrically Conductive DSP Cement Composites
JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS
Autore/i: Mazzoli, Alida; Corinaldesi, Valeria; Moglie, Franco; MARIANI PRIMIANI, Valter; Favoni, Orlando
Classificazione: 1 Contributo su Rivista
Abstract: Electromagnetic shielding and propagation in concrete structures are getting more and more interest in radiation hazard problems and wireless communications. The protection of sensitive environment is nowadays carried out by appropriate shielding room made of metallic walls. Even if effective they are heavy structures not adequate for the installation over existing building walls. The using of concrete composites filled by conductive elements represents a valid alternative to metallic shielded room since they can be adopted to directly build up the building walls and/or to easily plaster existing walls
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/236228 Collegamento a IRIS

2016
Reuse of wood waste for lightweight mortars
CONSTRUCTION & BUILDING MATERIALS
Autore/i: Corinaldesi, Valeria; Mazzoli, Alida; Siddique, Rafat
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/236221 Collegamento a IRIS

2015
Selective laser sintering manufacturing of polycaprolactone bone scaffolds for applications in bone tissue engineering
RAPID PROTOTYPING JOURNAL
Autore/i: Mazzoli, Alida; Ferretti, Concetta; Gigante, ANTONIO POMPILIO; Salvolini, Eleonora; MATTIOLI BELMONTE CIMA, Monica
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/228390 Collegamento a IRIS

2015
Effect of beta and gamma ray sterilization on the properties of polymeric materials for biomedical applications
X Convegno INSTM 2015 Book of Abstracts
Autore/i: Tittarelli, Francesca; Conti, Carla; Favoni, Orlando; Mazzoli, Alida; Bellezze, Tiziano
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: The goal of this study is to evaluate the effect of sterilization by beta and gamma radiation on the properties of four different polymeric specimens for biomedical use (Figure 1): a PVC pipe for connection in dialysis and heart surgery devices; a PVC band for enteral and parenteral nutrition bags, a TRIFLEX pipe (internal PE, middle PE/PVC, external PVC) for connection, a PC rigid pipe for the connection of tubes and bags for infusions. The effect of sterilization was studied by means of tensile mechanical characterization, thermo-gravimetric and morphological analysis and FT-IR spectroscopy. UV-VIS spectroscopy was used to evaluate the yellowing index, determined by radiation exposure. For each specimen, a no-sterilized one was tested for comparison.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/227441 Collegamento a IRIS

2015
Rapid manufacturing of polycaprolactone scaffolds for applications in bone tissue engineering
Congresso Nazionale Società Italiana Biomateriali (SIB) , Portonovo 3-5 Giugno 2015
Autore/i: Mazzoli, Alida; Ferretti, Concetta; Gigante, ANTONIO POMPILIO; Salvolini, Eleonora; MATTIOLI BELMONTE CIMA, Monica
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/226615 Collegamento a IRIS

2015
Evaluation of the early-age-shrinkage of Fiber Reinforced Concrete (FRC) using image analysis methods
CONSTRUCTION AND BUILDING MATERIALS
Autore/i: Mazzoli, Alida; Monosi, Saveria; Plescia, Eleonora Stella
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/228461 Collegamento a IRIS

2014
Utilizzo di microscopia elettronica a scansione e software per analisi di immagine nella valutazione della distribuzione granulometrica di polveri con morfologia irregolare
Atti 12° Convegno Nazionale AIMAT. Sezione Materiali Ceramici e Vetri
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Favoni, Orlando
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/229145 Collegamento a IRIS

2014
Particle size, size distribution and morphological evaluation of glass fiber reinforced plastic (GRP) industrial by-product
MICRON
Autore/i: Mazzoli, Alida; Moriconi, Giacomo
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/228391 Collegamento a IRIS

2014
Late treatment of orbital fractures: a new analysis for surgical planning
ACTA OTORHINOLARYNGOLOGICA ITALICA
Autore/i: Pagnoni, Mario; Marenco, M.; Ramieri, V.; Terenzi, V.; Bartoli, D.; Amodeo, G.; Mazzoli, Alida; Iannetti, G.
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/228421 Collegamento a IRIS

2013
Selective laser sintering in biomedical engineering
MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING
Autore/i: Mazzoli, Alida
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/228420 Collegamento a IRIS

2012
Valutazione della distribuzione granulometrica di polveri derivanti dalla lavorazione del legno
Atti XI Convegno Nazionale AIMAT
Autore/i: Mazzoli, Alida; Favoni, Orlando; Moriconi, Giacomo
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/229144 Collegamento a IRIS

2012
Particle size, size distribution and morphological evaluation of airborne dust particles of diverse woods by Scanning Electron Microscopy and image processing program
POWDER TECHNOLOGY
Autore/i: Mazzoli, Alida; Favoni, Orlando
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/229143 Collegamento a IRIS

2011
Mechanical behaviour and thermal conductivity of mortars containing waste rubber particles
MATERIALS & DESIGN
Autore/i: Corinaldesi, Valeria; Mazzoli, Alida; Moriconi, Giacomo
Editore: -Reigate : Scientific and Technical Press, 1982- -Oxford OX2 8DP United Kingdom: Butterworth Heinemann Publishers
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/53961 Collegamento a IRIS

2011
Mechanical Behaviour and Thermal Conductivity of Mortars with Waste Plastic Particles
Polymers in Concrete
Autore/i: Corinaldesi, Valeria; Mazzoli, Alida; Moriconi, Giacomo
Classificazione: 2 Contributo in Volume
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/54660 Collegamento a IRIS

2010
Valutazione sperimentale dell'efficienza di schermatura elettromagnetica di materiali a matrice cementizia di tipo DSP (Densified with Small Particles)
Atti del 10° Convegno Nazionale AIMAT
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; DE LEO, Roberto
Editore: Centro Editoriale Librario Università
Luogo di pubblicazione: RENDE
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: A cura di R. Aiello e F. Testa
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/44916 Collegamento a IRIS

2010
Mechanical and Physical Properties of Cement Mortars Containing Plastic Waste Particles
Second International Conference on Sustainable Construction Materials and Technologies
Autore/i: Corinaldesi, Valeria; Mazzoli, Alida; Moriconi, Giacomo
Editore: UWM Center for By-Products Utilization
Luogo di pubblicazione: MILWAUKEE, WI
Classificazione: 2 Contributo in Volume
Abstract: Proceedings of the Second International Conference, Ancona, Italy, June 28-30, 2010
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/51938 Collegamento a IRIS

2010
Palatal volume following rapid maxillary expansion in mixed dentition
ANGLE ORTHODONTIST
Autore/i: Gracco, A.; Malaguti, A.; Lombardo, L.; Mazzoli, Alida; Raffaeli, Roberto
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/55062 Collegamento a IRIS

2010
Preliminary results on the use of a noninvasive instrument for the evaluation of the depth of pigmented skin lesions: numerical simulations and experimental measurements
LASERS IN MEDICAL SCIENCE
Autore/i: Mazzoli, Alida; Munaretto, R.; Scalise, Lorenzo
Classificazione: 1 Contributo su Rivista
Abstract: The early detection of cutaneous pigmented lesions is an important aid to the clinician in recognizing malignant melanoma. In an attempt to correlate the depth of a pigmented skin lesion with its malignant potential, phantoms able to simulate the diffuse reflectance of some lesions of different thicknesses were manufactured and tested to validate a diagnostic instrument developed in-house. Such optical skin-tissue phantoms may be useful for accelerating and optimizing the diagnosis of suspicious lesions of the skin. In fact, benign melanocytic lesions are different in terms of their diffuse reflectance from melanoma. The diffuse reflectance of pigmented skin lesions depends on the amount and distribution of the absorbing/diffusing chromophores embedded in the skin layers. The basic phantom material is a PVA hydrogel in which appropriate amounts of optical scatter are added extraneously at the time of formation to achieve tunability of the optical properties. Liquid Indian ink is used to simulate melanin and all the other chromophores. Slabs were prepared to mimic lesions of different depths. The optical properties of the tissue phantoms were determined in the visible and near-infrared spectral ranges using a noninvasive instrument made from a purpose-modified digital camera. The measured reflectance was correlated with the depth of the lesion both in a Monte Carlo simulation environment and in a laboratory experiment.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/55294 Collegamento a IRIS

2010
Three-dimensional diagnosis and visualization supports in orthodontics based on Reverse Engineering and Solid Free-form Fabrication techniques
Modelling, Simulation and Optimization
Autore/i: Mazzoli, Alida; Germani, Michele; Raffaeli, R; Gracco, A.
Editore: In-Tech
Classificazione: 2 Contributo in Volume
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/42095 Collegamento a IRIS

2010
A method for Performance Evaluation of RE/RP Systems in Dentistry
RAPID PROTOTYPING JOURNAL
Autore/i: Germani, Michele; Raffaeli, R; Mazzoli, Alida
Classificazione: 1 Contributo su Rivista
Abstract: Purpose: The aim of this study is the investigation of a method in order to compare the scanning and reproducing accuracy of highly shaped objects like plaster casts used in dentistry. Design/Methodology/Approach: Theoretical considerations on errors introduced by the scanning systems and subsequent point clouds data elaboration have led to a method to estimate the accuracy of the whole process. Suitable indices have been chosen and computed at each stage. As a final result the overall chain, scanning and reproducing systems, can be assessed. In order to validate the proposed method casts have been scanned by means of commercial systems and then reproduced by using different RP technologies, materials and parameters. Error indices have been computed and reported. Findings: Since it is not possible to define reliable and meaningful reference models for nonstandard shapes, an absolute accuracy value for the scanning process cannot be stated. Anyway the proposed method thanks to relative performance indices allows the comparison of different acquisition systems and the evaluation of the most performing manufacturing chain. Practical implications: The study provides a method to assess the relative performance between commercial systems both in scanning and reproducing stage. Originality/Value: In literature some studies on the accuracy of scanning devices have been found but they are based on standard geometrical features. In this paper the problem of complex shapes in absence of reference model is addressed instead.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/37456 Collegamento a IRIS

2010
Mechanical behaviour and thermal conductivity of mortars with waste plastic particles
13th International Congress on Polymers in Concrete
Autore/i: Corinaldesi, Valeria; Mazzoli, Alida; Moriconi, Giacomo
Editore: Barbosa & Xavier
Luogo di pubblicazione: BRAGA
Classificazione: 2 Contributo in Volume
Abstract: Proceedings of ICPIC 2010, Funchal-Madeira, Portugal, 10-12 February 2010
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/42053 Collegamento a IRIS

2009
Evaluation of densified with small particles (DSP) cement composite: flexible vs. rigid metal fibers
EUROMAT 2009
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Moglie, Franco; MARIANI PRIMIANI, Valter; DE LEO, Roberto
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/43636 Collegamento a IRIS

2009
Efficienza di schermatura elettromagnetica alle alte frequenze di materiali a base cementizia di tipo DSP caricati con polvere di grafite e fibre metalliche
Atti del VII Convegno Nazionale INSTM sulla Scienza e Tecnologia dei Materiali
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; DE LEO, Roberto
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/43633 Collegamento a IRIS

2009
Short-term chemical and physical changes in Invisalign appliances
AUSTRALIAN ORTHODONTIC JOURNAL
Autore/i: Gracco, A; Mazzoli, Alida; Favoni, Orlando; Conti, Carla; Ferraris, P; Tosi, Giorgio; Guarneri, M. P.
Editore: -CASTLEMAINE:AUSTRALIAN SOC ORTHODONTISTS INC -Brisbane: University of Queensland Press.
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/28384 Collegamento a IRIS

2009
Mechanical and physical characterization of mortars containing post-consumer plastic particles
VARIREI 2009, Proceedings of the VII° International Congress “Valorisation and Recycling of Industrial Waste”
Autore/i: Corinaldesi, Valeria; Mazzoli, Alida; Moriconi, Giacomo; Tribuiani, C.
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: Proceedings of the VII International Congress “Valorisation and Recycling of Industrial Waste”
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/52639 Collegamento a IRIS

2009
Densified-Small-Particle (DSP) cement composites for electromagnetic shielding: practice and experimental analysis
Proceedings of EMC Europe 2009 Workshop
Autore/i: DE LEO, Roberto; Gradoni, Gabriele; MARIANI PRIMIANI, Valter; Mazzoli, Alida; Moglie, Franco; Moriconi, Giacomo
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: In this work, the shielding effectiveness (SE) of a densified-small-particles (DSP) cement composite, with different loading particles embedded in, has been investigated through the nested reverberation chamber facility. Particular effort has been spent in characterizing the SE behavior with the increasing drying and in improving the experimental practice to solve out previously faced measurement troubles. Findings are of interest in architectural shielding, microwave spectroscopy and investigation of physical-chemical properties of DSP materials.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/47295 Collegamento a IRIS

2009
Selection of Suitable Materials and Manufacturing of a Recyclable and Eco-Friendly Children's Footwear
Special Topics on Materials Science and Technology. An Italian Panorama
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Pauri, M. G.
Editore: Brill Academic Publishers
Luogo di pubblicazione: LEIDEN
Classificazione: 2 Contributo in Volume
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/42003 Collegamento a IRIS

2009
Direct fabrication through electron beam melting technology of custom cranial implants designed in a PHANToM-based haptic environment
MATERIALS & DESIGN
Autore/i: Mazzoli, Alida; Germani, Michele; Raffaeli, R.
Classificazione: 1 Contributo su Rivista
Abstract: Repairing critical human skull injuries requires the production and use of customized cranial implants and involves the integration of computer aided design and manufacturing (CAD and CAM). The main causes for large cranial defects are trauma, cranial tumors, infected craniotomy bone flaps and external neurosurgical decompression. The success of reconstructive cranial surgery depends upon: the preoperative evaluation of the defect, the design and manufacturing of the implant, and the skill of the operating surgeon. Cranial implant design is usually carried out manually using CAD although this process is very time-consuming and the quality of the end product depends wholly upon the skill of the operator. This paper presents an alternative automated method for the design of custom-made cranial plates in a PHANToM-based haptic environment, and their direct fabrication in biocompatible metal using electron beam melting (EBM) technology.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/37452 Collegamento a IRIS

2008
Utilizzo di materiali di derivazione naturale per l’ottimizzazione del benessere nella calzatura da bambino
Atti del 9° Convegno Nazionale AIMAT
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Pauri, M. G.
Editore: Edizioni Ziino
Luogo di pubblicazione: NAPOLI
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: Atti del 9° Convegno Nazionale AIMAT (Edito da D. Acierno, D. Caputo, R. Cioffi, A. D’Amore)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/43819 Collegamento a IRIS

2008
Evaluation of 3D Technologies in Dentistry
PROGRESS IN ORTHODONTICS
Autore/i: Gracco, A; Mazzoli, Alida; Raffaeli, R; Germani, Michele
Editore: Blackwell Munksgaard:PO Box 2148, Periodicals Department, DK-1016 Copenhagen K Denmark:011 45 33 755913, EMAIL: agentservices@oxon.blackwellpublishing.com, INTERNET: http://www.blackwellmunksgaard.com, Fax: 011 45 77 333377 Latest Publisher: Rho: Quintessenza Edizioni, 2004-
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/37454 Collegamento a IRIS

2008
Development of optical tissue phantoms for the evaluation of the thickness of pigmented skin lesions by a conveniently purpose-modified digital camera: numerical simulations and experimental measures.
Proceeding of BioMED '08 Proceedings of the Sixth IASTED International Conference on Biomedical Engineering
Autore/i: Mazzoli, Alida; Munaretto, R.; Scalise, Lorenzo
Editore: ACTA Press
Luogo di pubblicazione: Anaheim, CA, USA ©2008
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: The development of an optical skin-tissue phantom can be useful in accelerating and optimizing the diagnosis of suspected lesions of the skin tissue. In fact, benign melanocytic lesions are different, in terms of diffuse reflectance, from that of melanoma. Diffuse reflectance of skin pigmented lesions depends on the amount and distribution of the absorbing/diffusing cromophores, mainly haemoglobin and melanin, embedded in the skin layers. In an attempt to correlate the thickness to the dangerousness of the lesion, phantoms able to simulate the diffuse reflectance of some lesions with different thickness have been developed and used to validate an inhouse developed survey instrument potentially useful to the dermatologist to evaluate the dangerousness of a pigmented skin tissue lesion. The basic material for lesions and skin-like phantoms is a poly(vinyl alcohol) - PVA transparent hydrogel in which appropriate amounts of optical scatterers have been added extraneously at the time of formation, to achieve the tunability of optical properties. Liquid India ink has been used to simulate the melanin and all the other cromophores. Slabs were prepared to mimic lesions with different thicknesses. The optical properties of tissue phantoms have been determined in the visible and near-infrared spectral range by using a conveniently purpose-modified digital camera.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/55295 Collegamento a IRIS

2008
Cement Composite Shields Analysis at Microwave Frequencies Using Reverberation Fields
Atti del MISA 2008 Primo Incontro Bilaterale su Microonde nell'Ingegneria e nelle Scienze Applicate
Autore/i: DE LEO, Roberto; Gradoni, Gabriele; Mazzoli, Alida; Moglie, Franco; Moriconi, Giacomo; MARIANI PRIMIANI, Valter
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/52907 Collegamento a IRIS

2008
Shielding effectiveness evaluation of Densified with Small Particles (DSP) cement composite
Proceedings of the International Conference on EMC, EMC Europe 2008
Autore/i: DE LEO, Roberto; Gradoni, Gabriele; Mazzoli, Alida; Moglie, Franco; Moriconi, Giacomo; MARIANI PRIMIANI, Valter
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: This paper presents a shielding effectiveness evaluation of densified with small particle (DSP) cement composite at microwave frequencies by means of an improved nested reverberation chamber (NRC) technique, more faster than the classical one. In fact, the mechanical stirring inside the inner chamber was replaced by the frequency stirring method (FS) and only one scattering parameter was acquired to estimate both empty and loaded aperture. By this method, the stirrer movement becomes unnecessary. A software was used to manage the measurement and the post-processing operations.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/53791 Collegamento a IRIS

2008
Reverse engineering techniques to evaluate palatal morphologic and volumetric changes after the use of a rapid expander
ASM 2008
Autore/i: Mazzoli, Alida; Germani, Michele; Raffaeli, R; Moriconi, Giacomo
Editore: ACTA Press
Luogo di pubblicazione: CALGARY
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Abstract: Proceedings of the 17th IASTED International Conference on Applied Simulation and Modelling
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/52931 Collegamento a IRIS

2007
Caratterizzazione di sistemi RE/RP per il settore odontoiatrico
Proceedings of Congresso Internazionale Congiunto XVI ADM - XIX INGEGRAF
Autore/i: Raffaeli, R; Mazzoli, Alida; Germani, Michele
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/47927 Collegamento a IRIS

2007
Thin films of calcium-phosphate on titanium dental screws: sol-gel route versus plasma-spray
Biomedical Engineering – BioMED 2007
Autore/i: Mazzoli, Alida; Montenero, A; Moriconi, Giacomo; Favoni, O; Alfieri, I.
Editore: ACTA Press
Luogo di pubblicazione: CALGARY
Classificazione: 2 Contributo in Volume
Abstract: Proceedings 5th IASTED International Conference, Innsbruck, Austria, February 14-16, 2007.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/41923 Collegamento a IRIS

2007
Comparative production techniques analysis of hydroxiapatite surface coatings on the Ti dental screws derived by sol-gel and Plasma Spray methods
Modern Metallurgy of New Millennium Beginning
Autore/i: Pozdnyakova, A; Tsyganov, I; Mazzoli, Alida; Moriconi, Giacomo
Editore: Lipetsk State Technical University
Luogo di pubblicazione: LIPETSK
Classificazione: 2 Contributo in Volume
Abstract: Book of Scientific Papers
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/42837 Collegamento a IRIS

2007
Progettazione di placche craniche personalizzate usando tecnologie SFF e sistemi di modellazione haptic
XXXVI AIAS
Autore/i: Raffaeli, R; Germani, Michele; Mazzoli, Alida
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/48117 Collegamento a IRIS

2007
Application of optical digitizing techniques to evaluate the shape accuracy of anatomical models derived from CT data
JOURNAL OF ORAL AND MAXILLOFACIAL SURGERY
Autore/i: Mazzoli, Alida; Germani, Michele; Moriconi, Giacomo
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/50111 Collegamento a IRIS

2007
Characterization of an aluminum-filled polyamide powder for applications in selective laser sintering
MATERIALS & DESIGN
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Pauri, M. G.
Editore: -Reigate : Scientific and Technical Press, 1982- -Oxford OX2 8DP United Kingdom: Butterworth Heinemann Publishers
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/28332 Collegamento a IRIS

2007
Solid freeform fabrication of custom cranial implants designed in a phantom-based haptic environment
roc. of 16th IASTED International Conference on Applied Simulation and Modelling
Autore/i: Mazzoli, Alida; Germani, Michele; R., Raffaeli
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/48116 Collegamento a IRIS

2006
Sinterizzazione laser selettiva per bioceramici
COMPOSITI MAGAZINE
Autore/i: Mazzoli, Alida
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/229142 Collegamento a IRIS

2005
Influence of different manufacturing techniques and materials on the accuracy of anatomical models derived from CT data
Biomedical Engineering
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Germani, Michele
Editore: ACTA Press
Luogo di pubblicazione: CALGARY
Classificazione: 2 Contributo in Volume
Abstract: Proceedings of the Third IASTED International Conference, Innsbruck, Austria, February 16-18, 2005
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/38561 Collegamento a IRIS

2005
Hydroxyapatite coating on sintered polyamide
V Convegno Nazionale sulla Scienza e Tecnologia dei Materiali, Geremeas, Maracalagonis (CA)
Autore/i: Mazzoli, Alida; Alfieri, I.; Favoni, O.; Gnappi, G.; Montenero, A.; Moriconi, Giacomo; Pattini, F.
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/44046 Collegamento a IRIS

2005
Solid Free-form Fabrication (SFF) of a trabecular bone scaffold
Raccolta abstract del Congresso EUROMAT 2005
Autore/i: Mazzoli, Alida; Moriconi, Giacomo
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/229139 Collegamento a IRIS

2005
Coestrusione di miscele per film in bolla
Atti XVII Convegno Italiano di Scienza e Tecnologia delle Macromolecole (AIM 2005)
Autore/i: Pauri, MARCO GIUSEPPE; De Giorgio, M.; Mazzoli, Alida; Favoni, Orlando
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/229140 Collegamento a IRIS

2005
Influence of Different Manufacturing Techniques and Materials on the Accuracy of Anatomical SFF Models derived from CT Data,
Proceedings of the Iasted Int. Conference on Biomedical Engineering
Autore/i: Mazzoli, Alida; Germani, Michele; Moriconi, G.
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/48113 Collegamento a IRIS

2005
Thin Films of Calcium Phosphate on Titanium Implants: Sol-Gel Route versus Pulsed Laser Deposition
Atti 19a European Conference on Biomaterials (ESB 2005)
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Favoni, Orlando; Montenero, A.; Alfieri, Ilaria
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/229138 Collegamento a IRIS

2005
Utilizzo di una tecnologia tridimensionale per migliorare la diagnosi ortodontica
MONDO ORTODONTICO
Autore/i: Guarneri, F.; Capogna, V.; Mazzoli, Alida
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/229141 Collegamento a IRIS

2005
ELF Shielding Effectiveness of Concrete Structures Reinforced with Steel Nets and Fibers
Microwave and High Frequency Heating
Autore/i: DE LEO, Roberto; Moriconi, Giacomo; Mazzoli, Alida
Editore: Edizioni Bertani & C. Industria Grafica
Luogo di pubblicazione: CAVRIAGO (RE)
Classificazione: 2 Contributo in Volume
Abstract: Proceedings of the 10th International Conference, Modena, Italy, September 12-15, 2005
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/38792 Collegamento a IRIS

2005
The effect of diverse forming conditions on the morphology of hydroxyapatite spongy bioceramics
GLASS PHYSICS AND CHEMISTRY
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Favoni, O.
Editore: Maik Nauka / Interperiodica:Profsoyuznaya 90, Moscow 117864 Russia:011 7 095 3360266, Fax: 011 7 095 3360666
Classificazione: 1 Contributo su Rivista
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/28275 Collegamento a IRIS

2004
Aluminum-filled polyamide material for applications in selective laser sintering
VII Congresso Nazionale AIMAT, Ancona, Italy
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Pauri, MARCO GIUSEPPE; Favoni, O.; Ciciani, F.
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/50845 Collegamento a IRIS

2004
Effect of diverse forming conditions on the morphology of hydroxyapatite spongy bioceramics
Nanoparticles, Nanostructures & Nanocomposites
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Favoni, O.
Editore: VVM.co.Ltd.
Luogo di pubblicazione: ST. PETERSBURG
Classificazione: 2 Contributo in Volume
Abstract: Book of abstracts NNN 2004
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/38560 Collegamento a IRIS

2004
Manufacture and morphological characterization of osteoconductive porous scaffolds
Computational Methods in Materials Characterisation
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Favoni, O; Mammoli, A.
Editore: WIT Press
Luogo di pubblicazione: SOUTHAMPTON
Classificazione: 2 Contributo in Volume
Abstract: Proceedings First International Conference held 5-7 November 2003 in Santa Fe, New Mexico, U.S.A.
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/38333 Collegamento a IRIS

2003
Optical Techniques in Shape Accuracy Evaluation of an SLS Mandible Replica derived from CT Data
Proceedings of 12th IASTED Int. Conference Applied Simulation and Modelling
Autore/i: Germani, Michele; Mazzoli, Alida
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/48114 Collegamento a IRIS

2002
Caratterizzazione morfologica di un materiale composito polimero-ceramico biocompatibile per innesti ossei
Atti 6° Congresso AIMAT
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Favoni, O.
Editore: AIMAT
Luogo di pubblicazione: MODENA
Classificazione: 2 Contributo in Volume
Abstract: 8-11 Settembre 2002, Modena, Italy
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/38572 Collegamento a IRIS

2002
Preparazione e metodologie di lavorazione di una matrice polimero-ceramica biocompatibile per la realizzazione di guide sintetiche osteoconduttive
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Leo, T.
Classificazione: 6 Brevetti
Abstract: Classifica A61L27 00
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/48544 Collegamento a IRIS

2001
Rapid prototyping techniques and bone tissue engineering
III Congresso Nazionale sulla Scienza e Tecnologia dei Materiali INSTM
Autore/i: Mazzoli, Alida; Moriconi, Giacomo; Tittarelli, Francesca; Leo, T.
Classificazione: 4 Contributo in Atti di Convegno (Proceeding)
Scheda della pubblicazione: https://iris.univpm.it/handle/11566/53037 Collegamento a IRIS




Università Politecnica delle Marche

P.zza Roma 22, 60121 Ancona
Tel (+39) 071.220.1, Fax (+39) 071.220.2324
P.I. 00382520427